|
Ergonomic, 37 inch working height. Electric blade and clamp drive. Electric back gauge drive with touchpad for easy programming. Front table digital display (cm or inches) with multilingual operator guidance. Digital display accurate to 1/10 mm or 1/100 inch. Stores 99 programs with up to 99 steps in each (up to 15 repeat cuts can be integrated as a single step). Pre-programmed for standard paper sizes.
Memory key for repeat cuts. Automatic SET function for reference measurement and EJECT function for pushing out paper. Self-diagnostic system with error indication on display. Electronic hand wheel with variable speed control for manual back gauge setting. Bright, LED optical cutting line. 3-step, LED front table illumination; Adjustable, spindle guided back gauge with narrow separations and plastic gliders. Dual side guides on front and rear tables. High quality, German steel blade. Solid steel blade carrier and adjustable blade guides. All-metal construction. Includes stand with storage shelf, easy-access tool holder, and paper blocking tool. Optional side tables increase work surface.
Cut Length: | 25 1/2" inches |
Capacity: | 3" |
Type: | Electric |
Narrow Cut: | 1" |
Depth Behind Knife: | 24" |
Motor: | 2 HorsePower |
Size: | 48" D x 39" W x 51" H (61 1/2" W with side tables) |
Warranty: | 1 Year |
Power: | 115 V, 60 Hz (20 amp dedicated line required) |
Shipping Weight: | 775 lbs. (795 lbs. with side tables) Pounds |
![]() 1/4" Plastic Card Punch $90.95 |
![]() MBM Triumph 5255 20 3/8 inch Fully $14,359.00 |
![]() Lassco Spinnit FMMH 3.1 Fully $11,250.00 |
![]() Lassco Spinnit FM-2 $3,235.00 |
![]() SmartLam 12 inch Pouch Laminator $0.00 |
1 x Phoenix 2700-DH Dual Heat Laminator — Education Model | $1,405.00 |
1 x Proteus Workbench For 144" Javelin Integra | $1,143.00 |
1 x TBD - CUPPED RIBBON CABLE QO3100 | $113.58 |
1 x NONSTK-DEFEATURED CHIP20201V70535 | $658.20 |
1 x 5" Easel Backs | $29.95 |
1 x DF 915 Paper Folder DISCONTINUED | $4,500.00 |
1 x 6600 series remote display DISCONTINUED | $24.95 |
1 x Cassida CleanPRO complete care kit for currency counters | $36.95 |
1 x STRIPPING DEVICE 02572720 | $23.17 |
1 x CLUTCH PULLEY FOR INTERFACE | $211.24 |
1 x Cassida CleanPro air duster | $49.95 |
1 x TBD - MICROPRCSSR Z-705 | $850.62 |
1 x Graphik D .017 Blades | $82.80 |
1 x Book Clamps | $39.95 |
1 x SPACER, BEARING | $22.10 |
1 x PL-1200HP 12 in. High Performance Laminator | $2,895.00 |
1 x Superior Quality 0.080 Utility Blades | $54.00 |
1 x Vertical Utility Blade Holder | $99.00 |
1 x MACH REAR TOWER RAIL | $90.90 |
1 x 60954 Evolution 2 Bench for the 144" Evolution E2 | $1,296.00 |
1 x 4" x 12" Paper Cutter Jogging Block | $75.00 |
1 x 18" I Bar Shrink Wrap Sealer | $399.00 |
1 x RM-12/4 (12") Cutting Mat (4 Pack) | $20.38 |
2 x K-30 Replacement Scoring Blade | $13.20 |
1 x 1/4" SB-35 Bostitch type staples | $5.99 |
1 x Perfmaster Air V3 Perforating and Scoring Machine | $11,099.00 |
1 x Link | $11.21 |
1 x BASE LT BAR SPRT | $15.58 |
1 x SCREW (B-SEM M3X12) F/BC12 | $12.59 |
1 x 1/4X3/8X.17ID SPACER | $3.43 |
1 x TBD - INFRD SNSR WHT LBL NON ROHS | $364.82 |
1 x 5" x 16" Paper Cutter Jogging Block | $110.00 |
1 x Metal Loop Hangers | $59.50 |
1 x MICHRO ADJUST ROD | $515.14 |
1 x Horizon PC64 Cutting Sticks | $81.00 |
1 x P/C CATCH TRAY-ON 1611 LINE DISCONTINUED D | $36.00 |
1 x Paper Receiving Tray DC-8 Micro | $64.64 |
1 x DC-210N Perf & Score Cutter | $179.00 |
1 x CLAMP HANDLE 1GLV0019701AA | $132.95 |
1 x BLANK CHAD DIVERTER | $23.87 |
1 x Proteus Workbench For 124" Javelin Integra | $972.00 |
1 x Bind base | $53.38 |
1 x O-RING 4004583-00 | $27.81 |
1 x Clear - No Stripe Copier Transparencies | $24.95 |
1 x Flat Belt | $53.87 |
1 x Sheridan HT 18 Trimmer Cutting Knife | $239.00 |
1 x PUNCH PIN 5/32 SQ. 3-1 | $89.84 |
1 x B/O FEED SHAFT | $62.28 |
1 x K-29 Replacement Perforation Blade | $13.20 |